Specific controls for refrigeration or air conditioning equipment
PRESSURE VALVE 3/4 PENN V46AC-9600 Water pressure valve V46AE-9600 of 1 Inch. Penn (Johnson Controls). Pressure range 5 to 18 bar (for refrigerants R22/134a/404A/R12/502). Straight Body. Type of connection 13 (capillary 75 cm flared nut 7/16-20 UNF)
Saginomiya AWR-2006GLW pressure regulating valve 1. The pressure water valve can detect the refrigerant pressure of the water-cooled condenser and control the cooling water quantity. 2. Look for stable operation of freezing device, save cooling water. 3. Suitable for R22, R134a, R404A and other refrigerants
Thermostatic Expansion Valve, TGE, R407C 067N4009 Temperature Range [°C]: -25 - 10, MOP [°C]: 15, Orifice Capacities [kW]: 42.00, Orifice Capacities [TR]: 12.00, Pressure Balancing : External equalization/compensation
NRV type 1/2 THREAD check valves can be used in liquid, suction and hot gas pipes in refrigeration and air conditioning installations with fluorinated refrigerants.
CH LTC-200 DIGITAL MICROPROCESSOR
The F 200 / F 300 / TSF 200 / TSF 300 / M3 are digital microprocessor thermostats, suitable for temperature refrigeration applications with ON/OFF regulation and defrost control at time intervals, to regulate temperature or by continuous operating time. of the compressor, electrical heating or hot gas by inversion of cycle. The equipment is equipped with optimization functions and special defrost functions used to obtain energy savings from the control. The thermostats, depending on the model, have from 2 to 3 relay outputs and from 2 to 3 inputs for PTC or NTC temperature probes, as well as an internal buzzer for acoustic signaling of the ALARM and programming.
EBERLE THERMOSTAT KLR-E 525.55 With adjustable dead zone from 0.5 to 7.5 K. Optionally a remote probe can be used; To do this, remove the internal probe (R 15) and also the jumper Br 1.
Thermostat, UT 73 060H1502 Temperature range [°C]: 0 - 40, Reset function: Auto, Contact function: SPDT, Capillary tube length [mm]: 2000, Enclosure degree of protection: IP20
THERMOSTAT RET-230 C03 DANFOSS RET 230 C3 THERMOSTAT 3 SPEEDS
TIMER CLOCK FRI-77G2 (-10º + 50º) THEBEN WITHOUT BOX W/ DELAY Switched analog switch for refrigeration with daily and short program for defrosting 2 channels DIN rail mounting with quick fixing
REVERSING VALVE COIL 24V RED LDK11480100 RANCO
Water pressure valve V46AA-9600 of 3/8. Penn (Johnson Controls). Pressure range 5 to 18 bar (for refrigerants R22/134a/404A/R12/502). Angled Body. Type of connection 13 (capillary 75 cm flared nut 7/16-20 UNF)
FRI 77 h-2 Switched analog switch for refrigeration with daily and short program for defrost Interchangeable racks Synchronous
REVERSING VALVE 3/4-1/2 RV03ED12080000 RANCO 4 WAYS Ranco 4-way reversing valve The RANCO series four-way reversing valves are applicable to hot pump and air conditioning systems. Switching between cooling mode and heating mode can be done by changing the flow path.
Digital Refrigeration Thermostat. 32x74. 2 PTC/NTC inputs. 2 Relays (Out/Def/Fan/Al/Aux) Configurable. Temperature range: -50..+150ºC. Red display. Decimal point. IP keyboard. IP65 protection. Power supply 230...110V. 1 digital input. Alarm / internal buzzer. 2 NTC-1 (2)-IP68 probes included
EVK223 8A THERMOSTAT -2 PROBES INCLUDED AT 230 VAC
Solenoid valve orifice 12.5 mm 5/8 welding Castel brand model 1078/5
PRESSURE SWITCH JC606M COSMOS A/B MANUAL/AUTO
Regulation range [bar] Pe: 8.00 - 32.00, Differential [bar]: 1.80 - 6.00, Reset function: Auto, Pressure connection type: Flared, Pressure connection size: 1/4, Housing protection degree: IP44, working pressure max. [bar]: 35.0
ORIFICE Nº 0X (T2/TE2) DANFOSS (068-2002) T 2/TE 2 orifice, filter and label 01 Orifice with filter assemblies, designed to be used with valves with weld adapter or standard valves. The nominal capacity is based on: Evaporating temperature te = +5ºC for range N and te = -30ºC for range B Condensing temperature tc = +32ºC Liquid refrigerant temperature tl = +28ºC
PRESSURE STAT DNS-D306X A/BR/AUTO High and low pressure switch controller, auto reset, DNS-D306X,
HNS-C130X Alta, a switch controller designed to provide high performance. This pressure switch features manual reset, offering precise control in specific applications. Explore the reliability and versatility of this essential pressure monitoring device.
Ranco 4-Way Reversing Valves are designed for heat pump applications including window, integral and split systems. They are the key component in providing heating and cooling through the heat pump system by reversing the direction in which the coolant flows.
LIMITER 1 POLE 25 AMP
DIFFERENTIAL SWITCH 4P 40A 30mA REF.235410 FROM MOELLER
SHUT-OFF VALVE 3/4 STRAIGHT WHEEL THREAD -6210/6 CASTEL
PT100(V) PROBE 6X55 CABLE VETROTREX 3M3HRTD resistance thermo temperature probe. Measurements: 6x55mm. 3 threads. Model: PT100. Original Manufacturer Code: SN200038. ELIWELL, PROMASOL.
MINI-PRESSURE SWITCH AP G63 R/AUTO/ROS S/PUL. G63H3076000
MINI-PRESSURE SWITCH BP G60 R/AUTO/THREAD S/PUL. G60H1115650
OSAKA BIPOLAR SWITCH 125/250 GREEN LED 0 / 125º (X000994)
OSAKA BIPOLAR SWITCH 125/250 RED LED 0º / 125º (X000306)
REVERSING VALVE STF-0101G + COIL 01SJ504F1
PRESSURE SWITCH 017-4701 RANCO
DELTA THERMOSTAT TYBOX 137 RADIO HEATING 6053073 Power type: batteries (2 batteries included Alkaline LR03) Place of use: indoor Display type: LCD Operating temperature: -10 to 40 °C 5-year warranty Measurements: 102 mm x 80 mm x 35mm Wireless
Limiter 2 poles 20 Amp (674067)
Electronic control 2 points IC PLUS 902 NTC/PTC 230V ICPlus 902 controllers are electronic devices used to control temperature. The monitoring systems are compatible with TelevisSystem and with ModBus protocol.
24 hour programmer GD011. You will be able to time those devices that you want whenever you want. Easy to use: just raise or lower tabs at the times you need. It does not matter if the device is connected to work or not.
Hermetic Piston Compressor Area NE6210CK
KP-71 thermostat (-5/+20) Danfoss-JA599 (60L111366) •Mechanical thermostats with remote temperature sensor, with adjustable differential. IP20 •SPDT electrical contact. •Front adjustment via dial.
KP-68 thermostat (5º +35º) Danfoss 60L1111 •Mechanical thermostats with remote temperature sensor, with adjustable differential. IP20 •SPDT electrical contact. •Front adjustment via dial.
KP-69 thermostat (-5/+35) Danfoss-JA023 (60L1112) •Mechanical thermostats with remote temperature sensor, with adjustable differential. IP20 •SPDT electrical contact. •Front adjustment via dial.
THERMOSTAT KP-63 (-50/-10) DANFOSS- JA012 (60L1108) •Mechanical thermostats with remote temperature sensor, with adjustable differential. IP20 •SPDT electrical contact. •Front adjustment by dial.
Universal non-inverter electronic module ELC 6 Universal electronic replacement for any machine on the market, except inverter equipment. Includes 6 relays for maneuvers and external receiver. It has an auto-start function.
Compressor start delay timer TD69 SUPCO, Timer, Delay on Break, 6 sec. to 8 min. Adjustable TD69
LG-IR-WF-1 WIFI CONTROLLER FOR INDOOR UNITS THROUGH INTESISHOME Easy WiFi configuration using the native Android and iOS application. b/g/n WiFi standards supported at 2.4 GHz. Quick and easy installation (plug in and configure WiFi). No external power is required. Simultaneous control of the AC unit by the manufacturer's remote control and by AC Cloud Control via app and web. Native app for Android and iOS. Web-based control panel.
Wi-Fi online controller for Daikin indoor units MOD BRP069A41 Control of several Daikin Emura units through an application Create a comfortable climate in your home Remote fault detection Online controller: control the indoor unit from anywhere with an application, through the local network or Internet Check the weather conditions and forecasts of the place where the unit is located
The telephone control is used to connect/disconnect electrical devices with a 230V/50 Hz power supply. It allows connecting and disconnecting the plugged-in device manually or by telephone. If the connection is made through a telephone call, it is necessary to dial the assigned access code. The telephone control is powered at 230V/50Hz by means of the socket that it incorporates. The Telephone Control can be connected to the telephone line as a single installation or in the framework of a configuration with other installations connected later that are allowed.